Provided in the table are the audio and LED indicators for the Mortise touch
| Actions | Indicators |
| Bluetooth Connection | Status indicator flashes blue |
| Successfully Unlocked | Ascending 4 fast tones after unlocking and flashing green LED 2 times |
| Successfully Locked | 1 long beep after the lock is locked and a green LED for 2 seconds |
| Incorrect PIN | 4 short beeps and flash red LED 2 times |
| Invalid RFID | Descending 4 fast tones |
| Invalid Fingerprint | Single invalid attempt - 2 short beeps 3 invalid attempts - Descending 4 fast tones |
| Obstruction Alarm | 6 sets of 4 short beeps |
| Keypad Disabled Mode Activated | Ascending 3 fast tones |
| Keypad Disabled Mode Deactivated | Descending 3 fast tones |
| Keypad Security Lockout Alarm | Low-high siren for 30 /60 / 90 seconds |
| Keypad Security Lockout Deactivated | 2 long beeps |
| Low Battery Alert | When mortise is locked or unlocked: If battery is below 20% - 2 sets of 2 short beeps with pulsing Red LED If battery is below 10% - 4 sets of 2 short beeps with pulsing Red LED |
| Fire Alarm | Ascending 4 continuous tones |
| Tamper Alarm | Continuous long beep |
| Hard Reset / Unpair | Descending 3 slow tones |
| Pairing | Ascending 3 fast tones |