Step-by-Step Guide to Calibration – Ensure Smooth and Accurate Operation!

There are 2 ways to calibrate the Deadbolt Go lock:

1. Calibrate before pairing

     a. Key in the factory pin while the deadbolt latch is extended.

         This will activate the motor to start the calibration.

         The lock will emit one beeping sound and the latch will retract to indicate successful calibration.

     b. Hold the 'Unlock' button while the deadbolt latch is retracted.

         This will activate the motor to start the calibration.

         The lock will emit one beeping sound and the latch will extend to indicate successful calibration.

 *The app will not suggest users to calibrate the lock if successful calibration before pairing is done.

2. Calibrate after pairing - follow in-app instructions