Lock calibration is a crucial process in ensuring the optimal performance and security of locking systems.
Follow these instructions, and you'll be on your way to calibrating your Nordic Retrofit Lock with ease.
(Note: Please install the igloohome application and create an account before setting up your lock for use.)
Ensure that the firmware and software versions are up to date:
Minimum Firmware version: 10010302
Minimum Software version: 3.0.5 and above
A. If you are installing for the first time, you will be prompted by the app to calibrate your lock
b. The lock will check your battery level to ensure an optimal calibration experience.
C. At the same time, manually turn the thumbturn to its maximum position, ensuring the door is in an unlock position.
D. Select the lock position and how the door opens accurately.
E. Select the correct mount type. You may refer to the diagram shown in the app as a reference.
F. Install your magnet based on the reference shown in the app, and click “Next” to procced.
G. Open the door slightly ajar, ensure the latch bolt is leaning on the door. You will hear an audio indicator to notify you that you can proceed to the next step. Click "Next" to proceed.
H. Follow the video instructions to calibrate locking and unlocking of the bolt or latch, depending on the type of mount type selected earlier.
I. Close the door fully while keeping it unlocked. You will hear an audio indicator to notify you that you can proceed to the next step. Click "Next" to proceed.
J. Your Retrofit lock will automatically calibrate itself for your door. There will be an audio alert and the LED indicator will show green upon completion.
K. Conduct a final check to finish set up.
NORDIC LATCH CALIBRATION
NORDIC BOLT CALIBRATION