• Ensure the keypad has batteries.
  • Peel off the backing of the adhesive on the back of the mounting plate.
  • Mounting the Keypad. Press the mounting plate against the wall/surface where you want to install the Keypad. Ensure the location is within Bluetooth range of the locks you intend to pair it with. (*Before mounting, it is recommended that the Keypad is paired and tested with the locks you want to link to, at the desired installation location.)
  • Drill the mounting bracket into the wall with the provided screw and screw anchor.
  • Slide the Keypad onto the mounting plate.
  • Secure the Keypad to the mounting plate with the Torx screws and Torx screwdriver provided.

Simply watch the video to guide you with the installation!